Publications

2012

  1. M. Soshi, K. Yamazaki, A study on the effect of rotational dynamic characteristics of a machine tool spindle drive on milling processes, 5th CIRP conference on High Performance Cutting 2012, pp. 319-324
  2. T. Fujimori, K. Taniguchi, C. Ellis, K. Yamazaki, T. Aoyama, A study on error compensation on high precision machine tool system using a 2D laser holographic scale system, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 6, No. 6, pp. 999-1014
  3. K. Nakamoto, T. Aoyama, K. Katahira, P. Fonda, K. Yamazaki, A study of nanometric surface generation on tungsten carbide using a micro polycrystalline diamond end mill, International Journal of Automation Technology, Vol. 6, No. 4
  4. K. Nakamoto, K. Katahira, H. Ohmori, K. Yamazaki, T. Aoyama, A study on the quality of micromachined surface on tungsten carbide generated by PCD micro end mill, CIRP Annals-Manufacturing Technology, Vol. 61, pp. 567-570
  5. M. Soshi, P. Fonda, M. Kashihara, H. Yonetani, K. Yamazaki, A study on cubic boron nitride (CBN) milling of hardened cast iron for productive and quality manufacturing of machine tool structural components, International Journal of Advanced Manufacturing Technology
  6. P. Fonda, K. Katahira, Y. Kobayashi, K. Yamazaki, WEDM condition parameter optimization for PCD micro tool geometry fabrication process and quality movement, International Journal of Advanced Manufacturing Technology
  7. D. Kono, A. Matsubara, K. Yamazaki, Estimation of dynamic mechanical error for evaluation of machine tool structures, International Journal of Automation Technology, Vol. 6, No. 2, pp. 147-153
  8. D. Kondo, A. Matsubara, K. Yamazaki, Analysis method for investigating the influence of mechanical components on dynamic mechanical error of machine tools, Precision Engineering, Vol. 36, Issue 3, pp. 477-484
  9. T. Fujita, A. Matsubara, K. Yamazaki, Influence of friction on high precision positioning control, 2010 International Symposium on Flexible Automation
  10. M.L. Chan, P. Fonda, C. Reles, J. Xie, H. Najar, L. Lin, K. Yamazaki, D. A. Horsley, Micromachining 3D hemispherical features in silicon via micro electrodischarge machining, IEEE MEMS 2012, Paris, France, Vol 1/29/12-2/3/12, pp. 289-292

2011

  1. T. Fujimori, K. Taniguchi, C. Ellis, K. Yamazaki, T. Aoyama, A developmental study on two dimensional laser scale system for high precision machine tool system, The 6th International conference on Leading Edge Manufacturing in 21st Century(LEM21), Vol. No. 11-207, 2011
  2. X. Zhang, W. Tsang, K. Yamazaki, M. Mori, A study on automatic on-machine inspection system for 3D modeling and measurement of cutting tools, Journal of Intelligent Manufacturing
  3. K. Katahira, K. Nakamoto, P. Fonda, H. Ohmori, K. Yamazaki, A novel technique for reconditioning polycrystalline diamond tools surfaces applied for silicon micromachining, CIRP Annals Manufacturing Technology, Vol.60/1-2011 pp. 591-594
  4. M. Soshi, S. Yu, S. Ishii, K. Yamazaki, Development of a high torque-high power spindle system equipped with a synchronous motor for high performance cutting, CIRP Annals Manufacturing Technology, Vol.60/1-2011 pp. 399-402

2010

  1. X. Cheng, Z.G. Wang, S. Kobayashi, K. Nakamoto, K. Yamazaki, Tool fabrication system for micro/nano milling—Function analysis and design of a six-axis Wire EDM machine, International Journal of Advanced Manufacturing Technology (Article in Press)
  2. Z.G. Wang, X. Cheng, K. Nakamoto, S. Kobayashi, K. Yamazaki, Design and development of a precision machine tool with counter motion mechanisms, International Journal of Machine Tools & Manufacture (Article in press)
  3. X. Zhang, X. Tian, K. Yamazaki, Machining Setup Modeling System based on Stereo Vision, International Journal of Advanced Manufacturing Technology (Article in press)
  4. D. Du, Y. Liu, X. Guo, K. Yamazaki, M. Fujishima, An Accurate Adaptive NURBS Curve Interpolator with Real-time Flexible Acceleration/Deceleration Control, Robotics and Computer-Integrated Manufacturing (Article in press)
  5. D. Du, X. Xu, K. Yamazaki, A study on the Generation of Silicon based Hardware PLC by means of the Direct Conversion of the Ladder Diagram to Circuit Design Language, International Journal of Advanced Manufacturing Technology (Article in press)
  6. X. Tian, X. Zhang, K. Yamazaki, A. Hansel, A Study on Three-Dimensional Vision System for Machining Setup Verification, Robotics and Computer-Integrated Manufacturing, Vol.26(1), 2010, pp.46-55.
  7. Z.G. Wang, X. Cheng, K. Nakamoto, S. Kobayashi, K. Yamazaki, study on nano metric surface finish generation in micromachining of hard and brittle materials, 5th International Conference on MicroManufacturing, Madison, Wisconsin, USA, April 5-8, 2010.

2009

  1. M. Soshi, H. Ishiguro, K. Yamazaki, A Study on the Development of a Multi-Purpose Spindle System for Quality Productive Machining, CIRP Annals, Vol. 58, 2009, pp.327-330.
  2. X. Cheng, Z.G. Wang, S. Kobayashi, K. Nakamoto, K. Yamazaki, Development of a six-axis wire electrical discharge machine for the fabrication of micro end mills, Journal of Engineering Manufacture, Vol.223(2), 2009, pp.121-131.
  3. X. Cheng, Z.G. Wang, S. Kobayashi, K. Nakamoto, K. Yamazaki, Development of a computer assistant programming system for micro/nano milling tool fabrication by multi-axis Wire EDM, International Journal of Computer Integrated Manufacturing, Vol.22(9), 2009, pp. 847-856.
  4. X. Cheng, Z.G. Wang, S. Kobayashi, K. Nakamoto, K. Yamazaki, Design and development of micro polycrystalline diamond ball end mill for micro/nano freeform machining of hard and brittle materials, Journal of Micromechanics and Microengineering, Vol.19, 2009, pp.115022-1-10.
  5. Z.G. Wang, S. Kobayashi, I. Matsumoto, K. Yamazaki, X. Cheng, J.-P. Delplanque, Systematic study of ultrasonic vibration assisted electron beam irradiation process, Transactions of ASME, Journal of Manufacturing Science & Engineering, Vol.131(4), 2009, pp.041006-1-8.
  6. D. Du, Y. Liu, X. Guo, K. Yamazaki, M. Fujishima, Study on LD-VHDL Conversion for FPGA-BASED PLC Implementation, International Journal of Advanced Manufacturing Technology, Vol. 40, 2009, pp.1181-1190.
  7. X. Zhang, Z.G. Wang, K. Yamazaki, Error Budget of On-Machine Measurement System on A Micro/Nano Machining Center, ASPE 2009 Annual Meeting, Monterey, CA, pp.279~282.
  8. Z.G. Wang, X. Cheng, K. Nakamoto, S. Kobayashi, K. Yamazaki Modeling of minimum chip thickness in micromachining of hard tool steels with the modified slip line model, ASPE 2009 Annual Meeting, pp.467-470.

2008

  1. Naoki Uchiyama, Kazuo Yamazaki, On the effectiveness of contouring control for machine tool feed drive systems, Journal of the Japan Society for Precision Engineering (in Japanese), Vol. 74, 2008, pp.1193-1198
  2. Z.G. Wang, J.P. Delplanque, K. Yamazaki, Y. Daichi, S. Sano, Study of Vibration Assisted Electron Beams Machining Process: Simulation of the Vibration Structure, NAMRI/SME Transactions, Vol.36, 2008, pp.501-508
  3. Z.G. Wang, J.P. Delplanque, K. Yamazaki, Y. Daichi, S. Sano, Study of vibration assisted electron beams machining process: Design and dynamics analysis of the vibration structure, NAMRI/SME Transactions, Vol.36, 2008, pp.509-515
  4. X. Cheng, K. Nakamoto, M. Sugai, S. Matsumoto, Z.G. Wang, K. Yamazaki, Development of Ultra-Precision Machining System with Unique Wire EDM Tool Fabrication System for Micro/Nano Machining, Annals of CIRP, Vol.57, 2008, pp.415-420
  5. P. Fonda, Z.G. Wang, K. Yamazaki, Y. Akutsu, A fundamental study on Ti-6Al-4V properties and their relation to EDM productivity, Journal of Materials Processing Technology, Vol.202, 2008, pp.583-589
  6. Y. Liu, W. Li, K. Yamazaki, K. Kashihara, M. Fujishima, An event-driven simulation method for motor driver in virtual machine tool system, Journal of Intelligent Manufacturing, Vol. 19(2), 2008, pp.241-248.
  7. W. Li, Y. Liu, K. Yamazaki, M. Fujishima, M. Mori, The design of nurbs pre-interpolator for five-axis machining, International Journal of Advanced Manufacturing Technology, Vol. 36, 2008, pp.927-935.
  8. X. Guo, Y. Liu, K. Yamazaki, K. Kashihara, M. Fujishima, A study of a universal NC program processor for a CNC system, International Journal of Advanced Manufacturing Technology, Vol. 36, 2008, pp.738-745.
  9. X. Zhang, W. Tsang, X. Tian, K. Yamazaki, M. Mori, Automatic segmentation of the apparent contour for 3D modeling of cutting tool from single view, 4th International Symposium of Visual Computing ISVC08, 2008, Las Vegas, pp.772-781.
  10. W. Tsang, X. Zhang, X. Tian, K. Yamazaki, M. Mori, An experimental study of reconstruction of tool cutting edge features using space carving method, 4th International Symposium of Visual Computing ISVC 2008, 2008, Las Vegas, Springer, pp.869-878.
  11. Z.G. Wang, K. Nakamoto, M. Sugai, S. Matsumoto X. Cheng, K. Yamazaki, Design and development of an ultra-precision machine tool with a vibration suppression mechanism, Proceedings of the EUSPEN International Conference- Zuriuch, May 2008, Vol.1, pp.424-428.

2007

  1. X. Tian, H. Deng, K. Yamazaki, M. Mori, M. Fujishima, Quick 3D modeling of machining environment by means of on-machine stereo vision with digital decomposition, CIRP Annals, Vol.56, 2007, pp.411-414.
  2. Y. Daichi, Z.G. Wang, K. Yamazaki, S. Sano, Investigation of the formation and energy density of plasma based electron beams, Plasma Chemistry and Plasma Processing, Vol.27, 2007, pp.458-472.
  3. Z.G. Wang, K. Yamazaki, Y. Daichi, S. Sano, Numerical simulation of high productive surface finishing by electron beam irradiation with vibration assistance, NAMRC/SME Transactions, Vol. 35, 2007, pp. 425-432.
  4. Y. Liu, W. Li, M. Fujishima, K. Yamazaki, K. Kashihara, M. Fujishima, Study on systematic CNC core design method following model-driven design strategy, NAMRC/SME Transactions, Vol. 35, 2007, pp. 497-504.
  5. W. Li, Y. Liu, K. Yamazaki, M. Fujishima, M. Mori, Design and implementation of NURBS pre-interpolator for five-axis machining in FPGA, NAMRC/SME Transactions, Vol. 35, 2007, pp. 271-278.
  6. X. Guo, Y. Liu, K. Yamazaki, K. Kashihara, M. Fujishima, A novel design of NC program converter for CNC machine tool, NAMRC/SME Transactions, Vol. 35, 2007, pp.287-294.
  7. X. Zhang, X. Tian, K. Yamazaki, M. Fujishima, 3D reconstruction and pose determination of the cutting tool from a single view, 3rd International Symposium on Visual Computing (ISVC 2007), LNCS 4842, pp,377-386.
  8. Z.G. Wang, Y. Daichi, K. Yamazaki, S. Sano, Y. Uno, Numerical simulation of vibration assisted electron beam machining process, ASPE 2007 spring topical meeting on Vibration Assisted Machining Technology, Chapel Hill, North Carolina, April 2007, pp. 58-63.
  9. Y. Liu, X. Guo, W. Li, K. Yamazaki, K. Kashihara, M. Fujishima, An intelligent NC program processor for CNC system of machine tool, Robotics and Computer-Integrated Manufacturing, Vol. 23, 2007, pp.160-169.
  10. Y. Liu, W. Li, M. Fujishima, K. Yamazaki, Model-driven design and implementation of discrete event control for machine tool control system, International Journal of Computer Integrated Manufacturing, Vol.20, 2007, pp.548-556.

2006

  1. W. Li, Y. Liu, K. Yamazaki, A Design of NURBS Pre-Interpolator for Five- Axis Machining, International Journal of Advanced Manufacturing Technology(Accepted)
  2. X. Guo, Y. Liu, K. Yamazaki, K. Kashihara, M. Fujishima, A study on universal NC program processor for CNC system, International Journal of Advanced Manufacturing Technology (Accepted)
  3. X. Tian, H. Deng, K. Yamazaki, M. Mori, International Symposium on Visual Computing, Lake Tahoe, Nevada, USA, November, 2006 (Submitted)
  4. W. Li, Y. Liu, K. Yamazaki, M. Fujishima, M. Mori, A Novel Design of NURBS Interpolator for Five-axis Machining, Robotics and Computer- Integrated Manufacturing (Submitted)
  5. X. Guo, Y. Liu, K. Yamazaki, K. Kashihara, M. Fujishima, A Novel Design of NC Program Converter for CNC Machine Tool, ASME International Mechanical Engineering Congress and Exposition, November 5-10, 2006, Chicago, IL, USA (Submitted)
  6. Z.G. Wang, M. Mori, K. Yamazaki, Geometrical modeling of micro end milling process, MSEC 2006 International Conference on Manufacturing Science and Engineering, Ypsilanti, MI, USA (Submitted)
  7. H. Deng, X. Tian, K. Yamazaki, M. Mori, Line extraction with composite background subtraction, The 3rd Canadian Conference on Computer and Robot Vision Interface, CRV, 2006.
  8. Zhanbo Yu, Z.G. Wang, S Sano, K Yamazaki, Surface finishing of die and tool steels via plasma-based electron beam irradiation, Journal of Materials Processing Technology Vol. 180, 2006, pp. 246-252
  9. Y. Liu, J. Liang, M. Mori, M. Fujishima, K. Kashihara, K. Yamazaki, An event-driven simulation method for motor driver in virtual machine, International Journal of Advanced Manufacturing Technology (Submitted) 2006
  10. Y. Liu, W. Li, M. Fujishima, K. Yamazaki, An indirect conversion method of LD to VHDL for FPGA-based PLC, Robotics and Computer-Integrated Manufacturing (Submitted)
  11. Y. Liu, W. Li, M. Fujishima, M. Mori, K. Yamazaki, RPN model-based indirect conversion from ld to VHDL for FPGA oriented PLC design, 2006 Japan-USA Symposium on Flexible Automation.
  12. Y. Liu, X. Guo, W. Li, K. Kashihara, M. Fujishima, K. Yamazaki, An intelligent NC program processor design for CNC system, 2006 Japan- USA Symposium on Flexible Automation.
  13. P. Sriyotha, K. Nakamoto, M. Sugai, K. Yamazaki, Development of 5-axis linear motor driven super-precision machine, CIRP Annals, 2006, pp. 381- 384.
  14. P. Sriyotha, A. Sahasrabudhe, M. Mori, K. Yamazaki, Geometrical modeling of a ball-end finish milling process for a surface finish, Journal of Engineering Manufacture, Vol. 220(4), 2006, pp.467-477.
  15. X. Liu, M. Soshi, A. Sahasrabudhe, K. Yamazaki, M. Mori, A geometrical simulation system of ball end finish milling process and its application for surface topography and roughness prediction, Journal of Manufacturing Science and Engineering (ASME), Vol. 128, No. 1, 2006, pp. 74-85.

2005

  1. S. Jiang, J. Liang, Y. Liu, K. Yamazaki, M. Fujishima, Modeling and Cosimulation of FPGA-based SVPWM Control for PMSM, IEEE/IECON2005, November 2005, Raleigh.
  2. X. Tian, H. Deng, K. Yamazaki1, M. Fujishima, M. Mori, On-machine visual modeling system with object recognition, 2005 ASME International Mechanical Engineering Congress and Exposition
  3. T. Hayashi, X. Liu, K. Yamazaki, K. Yoshioka, M. Mori, Laser-ccd based measurement system for angular motion of integrated machine tools, The Third International Conference on Leading Edge Manufacturing in 21st Century, LEM21-2005, pp. 85-90.
  4. X. Liu, K. Ryu, K. Yamazaki, M. Mori, K. Yoshioka, Development of an error measurement system for rotary table, The Third International 2005 Conference on Leading Edge Manufacturing in 21st Century, LEM21-2005, pp. 115-120.
  5. H.X. Deng, X.D. Tian, K. Yamazaki, M. Mori, Model-Based Digital Decompositing with Variable Illumination, EOS Conference on Industrial Imaging and Machine Vision 2005, pp. 68-71.
  6. Y. Liu, H. Lin, M. Mori, K. Yamazaki, Model-driven mechatronics control system design and implementation, 15th International CIRP Design Seminar on New Trends in Engineering Design, 5/22-25, 2005.
  7. Y. Liu, K. Yamazaki, M. Fujishima, M. Mori, Model-Driven Programmable Logic Controller Design and FPGA-Based Hardware Implementation, ASME/IEEE International Conference on Mechatronic and Embedded Systems and Applications, 2005.
  8. W. Li, Y. Liu, K. Yamazaki, M. Fujishima, M. Mori, A Unified NURBS Interpolator for Five-Axes Machining, ASME/IEEE International Conference on Mechatronic and Embedded Systems and Applications, 2005.
  9. K. Hiramoto, A. Hansel, S. Ding, K. Yamazaki, A study on drive at center of gravity (DCG) feed principle and its application for development of high performance machine tool system, Annals of CIRP, 2005, pp. 333-336.
  10. P. Sriyotha, K. Yamazaki, X. Zhang, M. Mori, An experimental study on the vibration-free high speed operation of a three dimensional coordinate measuring machine, Journal of Manufacturing Systems Vol. 23 No. 3, 2004, pp. 173-181 (also appear in NAMRI/SME 32, 2004, p. 383-390).
  11. M. Soshi, X. Liu, K. Yamazaki, M Mori, Development of a simulation system for surface topographic features in 5-axis CNC machining process, The 7th International Conference on Progress Machining Technology, 2004, Suzhou, China, p.932-937.
  12. X. Liu, F. Ahmada, K. Yamazakia, M. Mori, Adaptive interpolation scheme for NURBS curves with the integration of machining dynamics, International Journal of Machine Tools & Manufacture, Vol. 45 2004, pp. 433-444.
  13. X. Tian, H. Deng, K. Yamazaki, M. Mori, M. Fujishima, Fusion Modeling System of CNC Machining Workspace by Digital Decompositing, The 38th CIRP Conference on Manufacturing Systems, May 2005, Brazil.
  14. X. Liu, K. Yamazaki, Y. Daichi, T. Furukawa, Surface micro modification of machined surfaces by wide-area electron beam (EB) irradiation, The Third International Conference on Leading Edge Manufacturing in 21st Century, LEM21-2005, pp. 745-750.

2004

  1. 3D GEOMETRY PROCESSING FOR CAM AND VIRTUAL MACHINING SIMULATION, K. Ding, X. Liu, X. Tian, K. Yamazaki, M. Mori, 7th CIRP International Workshop on Modeling of Machining Operations, France, May 4th, 2004.
  2. DEVELOPMENT OF AN ADAPTIVE NURBS INTERPOLATION SCHEME WITH THE CONSIDERATION OF MACHINING DYNAMICS, X. Liu, F. Ahmad, K. Yamazaki, M. Mori, Proceedings of 2004 JUSFA (also accepted by International Journal of Machine Tools and Manufacture).
  3. A REAL TIME SCHEME OF INTELLIGENT NURBS INTERPOLATION FOR CNCC SYSTEMS TO MACHINE SCULPTURED SURFACES, F. Ahmad, X. Liu, K. Yamazaki, X. Zhang, M. Mori, NAMRI/SME 32, 2004, p. 223-230.
  4. AN EXPERIMENTAL STUDY ON THE VIBRATION-FREE HIGH SPEED OPERATION OF A THREE DIMENSIONAL COORDINATE MEASURING MACHINE, P. Sriyotha, K. Yamazaki, X. Zhang, M. Mori, NAMRI/SME 32, 2004, p. 383-390.
  5. A GEOMETRICAL SIMULATION SYSTEM OF BALL END FINISH MILLING PROCESS AND ITS APPLICATION FOR SURFACE TOPOGRAPHY AND ROUGHNESS PREDICTION, X. Liu, M. Soshi, A. Sahasrabudhe, K. Yamazaki, M. Mori, Journal of Manufacturing Science and Engineering (ASME), 2004, accepted.
  6. A SURFACE BASED APPROACH TO RECOGNITION OF GEOMETRIC FEATURES FOR FREEFORM SURFACE FINISHING X. Zhang, J. Wang, K. Yamazaki, M. Mori, Computer-Aided Design, Vol. 36, No. 8, July 2004, p. 735-744.
  7. GEOMETRIC MODELING OF ELECTRICAL DISCHARGE MACHINING (EDM) DIE-SINKING PROCESS Y. Zhao, X. Zhang, X, Liu, K. Yamazaki, International Journal of Machine Tools & Manufacture, Vol. 44, 2004, p. 1-9.

2003

  1. VIRTUAL ENVIRONMENT FOR MACHINE TOOL MOTION CONTROL SYSTEM DESIGN J. Liang, X. Zhang, K. Yamazaki, International Conference on Leading Edge Manufacturing in 21st Century in Japan.
  2. THEORETICAL AND EXPERIMENTAL STUDY ON SURFACE FINISH BY HIGH-QUALITY 5-AXIS CNC MACHINING Abhijit Sahasrabudh, Xingquan Zhang, Xianbing Liu and Kazuo Yamazaki, ASPE 18th Annual Meeting Proceedings, 2003, p. 363-366.
  3. A STUDY ON LASER-CCD SPINDLE ERROR MEASUREMENT SYSTEM Ivan Su, Xingquan Zhang, and Kazuo Yamazaki, ASPE 18th Annual Meeting Proceedings, 2003, p. 127-130.
  4. A STUDY ON GEOMETRIC FEATURE RECOGNITION OF FREE FORM SURFACE PRODUCT Xingquan Zhang, Jie Wang, Kazuo Yamazaki, North American Manufacturing Research Institution of SME, Transaction of NAMRC XXXX1, May 20-23, 2003
  5. A STUDY ON THE VIBRATION FREE HIGH SPEED OPERATION OF THREE DIMENSIONAL COORDINATE MEASURING MACHINE Pinet Sriyotha, Xingquan Zhang, Kazuo Yamazaki, North American Manufacturing Research Institution of SME, NAMRC XXXX1, May 20-23, 2003

2002

  1. AUTONOMOUSLY GENERATIVE CMM PART PROGRAMMING FOR IN-PROCESS INSPECTION, Jiancheng Liu, Ng Hung, Kazuo Yamazaki, Kazuo Nakanishi, Transaction of ASME Journal of Manufacturing Science and Engineering
  2. A NEW APPROACH TO CONTOUR TRACKING IN MACHINE TOOL CONTROL, N. Uchiyama, J. Liang, K. Yamazaki, 2nd IFAC Conference on Mechatronic System, Berkeley, CA, Dec, 2002
  3. OPEN CONTROLLER ARCHITECTURE – PAST, PRESENT AND FUTURE Günter Pritschow (Co-ordinator), Yusuf Altintas, Francesco Jovane, Yoram Koren, Mamoru Mitsuishi, Shozo Takata, Hendrik van Brussel, Manfred Weck, Kazuo Yamazaki, Annals of the CIRP, Vol. 50/2/2001, pp. 463－470. (15%)
  4. MCHINABILITY OF PEARLITIC CAST IRON WITH CUBIC BORON NITRIDE (CBN) CUTTING TOOL, Jiancheng Liu, Kazuo Yamazaki, Hiroyuki Ueda, Norihiko Narutaki, Yasuo Yamane Transaction of ASME Journal of Manufacturing Science and Engineering , Vol.124, November, pp.850-832, 2002.
  5. MOLECULAR DYNAMICS SIMILATION FOR EDM DIE-SINKING EROSION PROCESS, Y. Zhao, X. Zhang, K. Yamazaki, Proceedings of ASPE 17th Annual Meeting, St. Louis, Missouri, Oot.20-25,’02, pp. 647-651.
  6. A STUDY ON A NOVEL TOOL TEMPERATURE MEASUREMENT METHOD IN HIGN-SPEED MACHINING OF TITANIUM, X. Zhang, K. Yamazaki, Y. Yamaguchi, Proceedings of ASPE 17th Annual Meeting, St. Louis, Missouri, Oct.20-25,’02 ,pp.425-433.
  7. STUDY ON AN OPEN SERVO SYSTEM FOR INTELLIGENT CONTROL OF A CNC MACHINE TOOL Kazuo Yamazaki, Xingquan Zhang, Norio Furukawa, Proceedings of the 6th International Conference on Progress Machining Technology, Sep.’02, Xi’an China.
  8. AUTOMATIC GEOMETRIC FEATURE RECOGNITION FOR SCULPTURE SURFACE MACHINING X. Zhang, J. Wang, K. Yamazaki, Proceedings of the 6th International Conference on Progress Machining Technology, Sep.’02, Xi’an China.
  9. A REFLECTIVE FIBER OPTIC SENSOR FOR SURFACE ROUGHNESS IN-PROCESS MEASUREMENT, Jiancheng Liu, Kazuo Yamazaki, Yi Zhou, and Sadayuki Matsumiya, Transaction of ASME Journal of Manufacturing Science and Engineering , pp.515-522, 2002.
  10. GEOMETRICAL ANALYSIS AND SIMULATION OF LINEAR MOTOR EQUIPPED EDM DIE-SINKING PROCESS BY SINGLE SPARK ALGORITHM, Y. Zhao, K. Yamazaki, X. Zhang, Y. Kawahara, 2002 Japan-USA Symposium on Flexible Automation, Hiroshima, Japan, pp.225-232, 2002.
  11. DEVELOPMENT OF FEATUER BASED AUTONOMOUS COORDINATE MEASUREMENT PLANNING SYSTEM FOR IN-PROCESS PART MEASUREMENT, X. Zhang, K. Yamazaki, 2002 Japan-USA Symposium on Flexible Automation, Hiroshima, Japan, pp.1281-1284, 2002.
  12. DEVELOPMENT OF AUTONOMOUS PRODUCTION COST ACCOUNTING (APCA) AND ITS IMPLEMENTATION INTO CNC MACHINE TOOL SYSTEM, K. Yamazaki, M. Fujishima, J. Liu, X. Zhang, I. Murata, 2002 Japan-USA Symposium on Flexible Automation, Hiroshima, Japan, pp.11-14, 2002.
  13. AUTONOMOUS DIANOSTIC SYSTEM FOR MACHINING PROCESS, B. Zhao, X. Zhang, K. Yamazaki, M. Mori, F. Fujishima, Proc. 3rd International Conference and 4th General Meeting of European Society for Precision Engineering and Nanotechnology, pp.269-272, 2002.
  14. ERROR BUDGET MODELING APPLIED TO THE CONCEPTUAL DESIGN OF A NOVEL 5-AXIS MACHINE TOOL, P. Fitsos, K. Yamazaki, Proc. 3rd International Conference and 4th General Meeting of European Society for Precision Engineering and Nanotechnology, pp.25-28, 2002.
  15. STUDY ON AN AUTOMATIC GEOMETRIC FEATURE RECOGNITION FOR SCULPTURE SURFACE MACHINING, X. Zhang, J. Wang, K. Yamazaki, Proc. 3rd International Conference and 4th General Meeting of European Society for Precision Engineering and Nanotechnology, pp.783-786, 2002.
  16. STUDY ON IN-SITU ENGINEERING OF CNC MACHINE SPINDLE, Nitin S. Chaphalkar, Xingquan Zhang, Kazuo Yamazaki, Masahiko Mori, Transaction of NAMRI/SME, NAMRC-XXX, pp.215-222, 2002.

2001

  1. The Kinematic Analysis Of The Volumetric Error Measurement Of A Prismatic Guideway Based On Six Optical Sensors And Three Diffraction Gratings, Ulrich Mueller, Yoshihito Kagawa, Kazuo Yamazaki, SIcon’01 Sensors for Industry Conference, pp. 224-228, 2001.
  2. DE-COUPLING OF AN OPTICAL GRATING BASED MEASUREMENT NORMAL FROM THE MACHINE TOOL STRUCTURE, Ulrich Mueller, Yoshihito Kagawa, Kazuo Yamazaki, Proceedings of American Society of Precision Engineering 2001 Annual Meeting, pp. 361-364, 2001.
  3. A STUDY ON A NOVEL 5-AXIS MACHINE TOOL USING DIRECT DRIVE, Fitsos, P., Yamazaki, K, Sugimoto, Y, Proceedings of American Society of Precision Engineering 2001 Annual Meeting, pp. 160-163, 2001.
  4. A STUDY ON MODEL-BASED ANALYSIS OF THE DYNAMIC MOTION ACCURACY OF CNC MACHINE TOOLS, Gabriel Johnston, Yoshihito Kagawa, Jiancheng Liu, Masahiko Mori, Kazuo Yamazaki, Proceedings of American Society of Precision Engineering 2001 Annual Meeting, pp. 144- 147, 2001.
  5. LASER-CCD BASED SENSOR SYSTEM FOR REAL TIME DETECTION OF MOTION LINEARITY, Yoshihito Kagawa, Sadayuki Matsumiya, Kazuo Yamazaki, Yue Yang, Proceedings of American Society of Precision Engineering 2001 Annual Meeting, pp. 111-114, 2001.
  6. AN INFRASTRUCTURE TO INTELLECTUALIZE A CNC MACHINE TOOL: TRUE-CNC, ( JAPANESE PAPER, ENGLISH ABSTRACT ATTACHED), Kazuo Yamazaki, Journal of the Japan Society of Precision Engineering, Vol.67, No.8, pp.1227-1231, 2001.
  7. MOLDING OF REPROCESSED THERMOPLASTICS WITH PREPLASTICATION INJECTION MOLDING, Manish V. Bedekar, Kazuo Yamazaki, Subhash H. Risbud, Journal of Applied Polymer Service, Vol.82, pp.1455-1461, 2001.
  8. A NOVEL APPROACH FOR SIMULTANEOUS MEASUREMENT OF THE LINEAR GUIDEWAY ERRORS OF A MACHINE TOOL WITH A VOLUMETRIC OPTICAL ENCODER, Ulrich Mueller, Yoshihito Kagawa, Kazuo Yamazaki, Jan Braasch, Proceedings of 10tthInternational Conference on Precision Engineering, pp. 629-633, 2001.
  9. LASER-CCD BASED 6 DEGREE-OF-FREEDOM MACHINE ERROR MEASURING SYSTEM (LC6MDS), Yoshihito Kagawa, Yue Yang, Kazuo Yamazaki, Jiancheng Liu, Transactions of NAMRI/SME, NAMRC-Vol XXIX, pp. 601-606, 2001.
  10. A STUDY ON DEVELOPMENT OF AN OPEN SERVO SYSTEM FOR INTELLIGENT CONTROL OF A CNC MACHINE TOOL, Masahiko Mori, Kazuo Yamazaki, Makoto Fujishima, Jiancheng Liu, Norio Furukawa, Annals of the CIRP, Vol.50/1, pp. 247-250, 2001.

2000

  1. RECOGNITION OF MACHINING FEATURES AND FEATURE TOPOLOGIES FROM NC PROGRAMS, X.Yan, K. Yamazaki, J. Liu, Computer-Aided Design, Vol. 32, pp. 605-616, 2000.
  2. SOFTWARE BASED MACHINING ADAPTIVE CONTROL AND ITS EFFECT EVALUATION FOR MILLING OPERATION, Jiancheng Liu, K. Yamazaki, The Proceedings of The 1st International Conference on Die & Mould Technology, Beijing, China, pp. 25-36, 2000. (invited)
  3. PC BASED OPEN ARCHITECTURE SERVO CONTROLLER FOR CNC MACHINING Surya Kommareddy, Kazuo Yamazaki, Yoshihito Kagawa, Workshop on Real time Operating Systems and Applications and Second Real Time Linux Workshop 2000, CD-Rom Website, 2000.
  4. EXPERIMENTAL STUDY ON MOTION ACCURACY OF CNC MACHINE TOOL WITH BALL SCREW DRIVE SYSTEM, Kazuo Yamazaki, Yasuhiro Kawahara, Yoshihito Kagawa, Jiancheng Liu, Jan Braasch, Makoto Fujishima, Masahiko Mori, Proceedings of American Society of Precision Engineering 2000 Annual Meeting, pp.260-263, 2000.
  5. EXTRACTION OF MILLING KNOW-HOW FROM NC PROGRAMS THROUGH REVERSE ENGINEERING, Xiren Yan, Kazuo Yamazaki, Jiancheng Liu, International Journal of Production Research, Vol.38 No.11, pp. 2443-2457, 2000.
  6. DEVELOPMENT OF AN AUTONOMOUS PRODUCTION COST ACCOUNTING SYSTEM FOR MANUFACTURING PROFITABLILTY INDEX, Jiancheng Liu, Kazuo Yamazaki, Garvin Leon, Progress of Machining Technology with Some Topics in Advanced Manufacturing Technology, ICPMT 2000, Beijing, China, pp. 784-789, 2000.
  7. EFFECT OF BALL SCREW’S DISTORTION DEFORMATION ON MOTION CONTOURING ACCURACY OF CNC MACHINE TOOLS, Jiancheng Liu, Kazuo Yamazaki, Gabriel Johnston, Proceedings of the 7th Mechatronics Forum International Conference, Georgia, Atlanta, Elsevier Science, Ltd. (CD-Rom) , 2000.
  8. PCD (Polycrystalline Diamond) TOOL WEAR IN TITANIUM MILLING, Jiancheng Liu, Kazuo Yamazaki, Gabriel Johnston, IMCC 2000 Hong Kong, pp.73- 74, 2000.
  9. MACHINING KNOW-HOW DATABASE BASED AUTONOMOUS OPERATION PLANNING, Jiancheng Liu, Kazuo Yamazaki, Karl Kunimitsu, IMCC’2000 Hong Kong, pp. 279- 280, 2000.
  10. MACHINING SIMULATION BASED FLANK WEAR PRECISION OF CUTTING TOOLS, Jiancheng Liu, Kazuo Yamazaki, Masaomi Tsutsumi, Yoshinori Isobata, The Proceedings of the 1st International Conference on Die & Mould Technology, Beijing, China, pp.427-442, 2000. (Invited)
  11. AUTONOMOUS MILLING PROGRESS ANALYSIS AND MACHINING KNOW-HOW DATABASE GENERATION FOR OPERATION PLANNING, Xiren Yan, Kazuo Yamazaki, Jiancheng Liu, Mitsuru Kubota, Proceedings of the 2000 Japan-USA Symposium on Flexible Automation, Michigan, ASME (CD-Rom), pp. 2000JUSFA-13160, 2000.
  12. DEVELOPMENT OF ULTRA-HIGH SPEED CNC COORDINATE MEASURING MACHINE FOR IN-LINE INSPECTION AND MACHINING QUALITY CONTROL WITH INTEGRATED HIGH-SPEED HORIZONTAL MACHINING CENTER, Kazuo Yamazaki, Jiancheng Liu, K. Tezuka, S.Matsumiya, K. Nakanishi, M.Mori, Proceedings of the 2000 Japan-USA Symposium on Flexible Automation, Michigan, ASME (CD-Rom), pp. 2000JUSFA-13178, 2000.
  13. STUDY ON THE DEVELOPMENT OF A THREE DIMENSIONAL LINEAR ENCODER SYSTEM FOR IN-PROCESS MOTION ERROR CALIBRATION AND COMPENSATION OF MACHINE TOOL AXES, Kazuo Yamazaki, Ulrich Mueller, Jiancheng Liu, Jan Braasch, Annals of the CIRP, Vol. 49/1, pp. 403-406, 2000.
  14. DURABLE PC-BASED REAL-TIME CONTROL SYSTEM FOR SERVOMOTOR CONTROL IN WINDOWS NT ENVIRONMENT, K. Yamazaki, S.P. Kommareddy, J. Liu, Proceedings of IPEC-Tokyo, pp. 355-360, 2000.
  15. CUTTING TOOL IDENTIFICATION SYSTEM FOR ACCIDENT-FREE MACHINING, Jiancheng Liu, Kazuo Yamazaki, Takao Koide, Transaction of NAMRI/SME, NAMRC-XXVIII, pp. 431-436, 2000.
  16. FIBER OPTIC SURFACE TOPOGRAPHY MEASUREMENT SENSOR AND ITS DESIGN STUDY, Yue Yang, Kazuo Yamazaki, Hideki Aoyama, Sadayuki Matsumiya, Precision Engineering Vol. 24, pp.32-40, 2000.

1999

  1. EXPERIMENTAL STUDY ON DYNAMIC ACCURACY BEHAVIOR OF A HIGH SPEED CNC MACHINE TOOL WORTH SEMI-CLOSED AND FULLY-CLOSED FEEDBACK CONTROL, Kazuo Yamazaki, Yashiro Kawahara, Jiancheng Liu, Jan Braasch, Makoto Fujishima, Proceedings of ASPE 1999 Annual Meeting, Vol.20, pp.461-464, 1999.
  2. AGILE PRODUCTION REALIZATION BASED ON AUTONOMOUSLY PROFICIENT CNC CONTROLLER INFRASTRUCTURE, Jiancheng Liu, Kazuo Yamazaki, Manufacturing Systems, Vol. 29 No. 5, pp. 427- 431, 1999
  3. ON-MACHINE QUALITY CONTROL SYSTEM FOR TRUE-CNC MANUFACTURING SYSTEM, Jiancheng Liu, Kazuo Yamazaki, Eric Kong, Proceedings of the 6th CIRP International Seminar on Computer-Aided Tolerancing, pp. 121-130, 1999.
  4. HIGH-SPEED MACHINING OF TITANIUM BY NEW PCD TOOLS, Masahiko Mori, Masaaki Furuta, Tetsuo Nakai, Tomohiro Fukaya, Jiancheng Liu, and Kazuo Yamazaki, SAE Technical Paper Series, 1999-01-2296, 1999.
  5. HIGH EFFICIENCY FINE BORING OF MONCRYSTALLINE SILICON INGOT BY ELECTRICAL DISCHARGE MACHINING, Yoshiyuki Uno, Akira Okada, Yasuhiro Okamoto, Kazuo Yamazaki, Subhash H. Risbud, Yoshiaki Yamanda, Elsevier Precision Engineering, pp. 126-133, 1999. (15%)
  6. A STUDY ON AUTONOMOUS HOLE MACHINING PROCESS ANALYSIS BY REVERSE ENGINEERING OF NC PROGRAMS, Xiren Yan, Lawrence Chan, Kazuo Yamazaki, Jiancheng Liu, Mitsuru Kubota, and Yoshikazu Amano, SAE Technical papers Series, 1999-01-2297, 1999.
  7. A FIBER-OPTIC BASED SENSOR PROBE FOR SURFACE ROUGHNESS MEASUREMENT, Jiancheng Liu, Kazuo Yamazaki, Yi Zhou, Kazusaku Tezuka, Transaction of NAMRI/SME, NAMRC-XXVII, pp.101-106, 1999.

1998

  1. GRADED COATINGS BY GRADIENT TEMPERATURE DENSIFICATION, Sung Kang Hur, Sang H. Yoo, Joanna R. Groza, Jung Man Doh, Kazuo Yamazaki, and Kazuo Shoda, J. Mater. Res., Vol. 13, No 5, pp. 1255-1259, 1998.
  2. TOOL WEAR ANALYSIS, Yoshiori Isobata, Masaomi Tsutsumi, Sun Kyu Lee, Kazuo Yamazaki, and Jiancheng Liu, Aerospace Engineering, November 11, 1998, Volume 18, pp. 21-23, 1998.
  3. IN-PROCESS TOOL UTILIZATION ANALYSIS BASED MACHINING SIMULATION, Yoshiori Isobata, Sun Kyu Lee, Kazuo Yamazaki, Jiancheng Liu, Masaomi Tsutsumi, Proceedings of the 1998 Aerospace Manufacturing Technology Conference, 1998, pp. 179- 186, 1998. (Same as B-2)
  4. b, Also appeared in: Yue Yang, Kazuo Yamazaki, Kazusaku Tezuka, New Manufacturing Era, Proceedings of the 29th CIRP International Seminar on Manufacturing Systems, 1997, pp.281-286
  5. a, SURFACE QUALITY MONITORING SYSTEM FOR PRODUCTIVE MACHINING AND MEASURING SYSTEMS, Y. Yang, K. Yamazaki, K. Tezuka, CIRP – Journal of Manufacturing Systems, Vol. 27 No. 3, 1998, pp. 321-326, 1998.
  6. NEW CNC MACHINE TOOL SYSTEM INTEGRATED WITH ULTRA HIGH SPEED INTELLIGENT CMM FOR IN-PROCESS MACHINING QUALITY CONTROL, J. Liu, K. Yamazaki, Proceedings of the International Conference on Quality Manufacturing, Z. Katz, Rand Afrikaans University, N.D. du Preez, University of Stellenbosch, (eds.), pp. 103-108, 1998.
  7. AUTONOMOUS COORDINATE MEASUREMENT PLANNING WITH WORK-INPROGRESS MEASUREMENT FOR TRUE-CNC, Hung Ng, Jiancheng Liu, Kazuo Yamazaki, Kazuo Nakanishi, Kazusaku Tezuka, Sun-Kyu Lee, Annals of the CIRP, Vol. 47/1, pp. 455-458, 1998.
  8. TIME EFFICIENT PROJECT-ORIENTED EDUCATION OF ENGINEERING GRAPHICS BASED ON SIMULATED INDUSTRY ENVIRONMENT FOR ELEMENTARY ENGINEERING STUDENTS, Kazuo Yamazaki, Bryan P.M. Chu, Jiancheng Liu, Proceedings of Manufacturing Education for the 21st Century, Volume V, pp. 341-346, 1998.
  9. DYNAMIC GAIN MOTION CONTROL WITH MULTI-AXIS TRAJECTORY MONITORING FOR MACHINE TOOL SYSTEMS, Jiancheng Liu, Kazuo Yamazaki, Yoich Yokoyama, Proceedings of the 1998 5th International Workshop on Advanced Motion Control, pp. 316-321, 1998.
  10. INTELLIGENT MULTI-AXIS MOTION CONTROL FOR MACHINE TOOL SYSTEMS, Jiancheng Liu, Yoich Yokoyama, Kazuo Yamazaki, and Sun Kyu Lee, Proceedings of the 1998 SAE Aerospace Manufacturing Technology Conference and Exposition, pp. 119-124, 1998. (Same as B-1)
  11. AGILE PRODUCTION REALIZATION BASED ON AUTONOMOUSLY PROFICIENT CNC CONTROLLER INFRASTRUCTURE, Jiancheng Liu and Kazuo Yamazaki, Proceedings of the 31st CIRP International Seminar on Manufacturing Systems, pp. 414-419, 1998.

1997

 

  • TETHERED MOBILE ROBOT FOR AUTOMATING HIGHWAY MAINTENANCE OPERATIONS, Daehie Hong, Steven A. Velinsky, and Kazuo Yamazaki, Robotics & Computer-Integrated Manufacturing, Vol. 13, No. 4, pp. 297-307, 1997.
  • PLASMA ACTIVATED SINTERING (PAS) – A MANUFACTURE FRIENDLY CONSOLIDATION PROCESS, Sang Yoo, Michael J. Paskowitz, Joanna R. Groza, Subhash H. Risbud, Kazuo Yamazaki, Proceedings of the 1997 NSF Design and Manufacturing Grantees Conference, pp. 311-312, 1997.
  • AUTONOMOUSLY PROFICIENT CNC CONTROLLER FOR HIGHPERFORMANCE MACHINE TOOLS BASED ON AN OPEN ARCHITECTURE CONCEPT, K. Yamazaki, Yoshimaro Hanaki, Masahiko Mori, Kazusaku Tezuka, Annals of the CIRP, Vol. 46/1, pp.275-278, 1997.
  • A STUDY ON AUTONOMOUS MACHINING PROCESS ANALYZER FOR TRUECNC, L. Chan and K. Yamazaki, Rapid Product Development, N. Ikawa, T. Kishinami, and F. Kimura (eds.) Chapman and Hall, pp. 329-3384, 1997.
  • A STUDY ON REAL-TIME TOOL UTILIZATION ANALYZER USING THREE DIMENSIONAL MACHINING SIMULATION, Yoshinori Isobata, Kazuo Yamazaki, Masaomi Tsutsumi, Proceedings of JSME Centennial Grand Congress, International Conference on Manufacturing Milestones towards the 21st Century, Japan Society of Mechanical Engineers, pp. 427-432477, 1997.
  • A STUDY ON SHIFTING TOWARDS MULTICULTURE-BASED MANUFACTURING TO PROMOTE SOCIETY – OBSERVATIONS AND STRATEGIES FOR SOLVING PROBLEMS, K. Yamazaki, International Journal Advanced Manufacturing Technology, Vol. 13, pp. 474- 477, 1997.
  • POTENTIAL TECHNOLOGIES FOR PROCESSING HIGH PERFORMANCE AND INNOVATIVE MATERIALS USING PLASMA ACRTIVATED SINTERING, Kazuo Yamazaki, Subhash H. Risbud, Joanna R. Groza and Kazuo Shoda, Proceedings from the International Conference on Manufacturing Milestones toward the 21st Century MM21, pp.187-192, 1997.

 

1996

  1. PLASMA ACTIVATED SINTERING (PAS)―A NOVEL MANUFACTURING CONSOLIDATION PROCESS FOR ADVANCED POWDER MATERIALS, Sang Yoo, Joanna R. Groza, Subhash R. Risbud, K. Yamazaki, Proceedings of the 1996 NSF Design and Manufacturing Grantees Conference, pp.453-454, 1996.
  2. TRUE CNC AS THE NEXT GENERATION PROFICIENT MACHINE TOOL CONTROL, Lawrence Chan and Kazuo Yamazaki, Proceedings International Manufacturing Engineering Conference (IMEC), pp. 368-371, 1996.
  3. OPEN ARCHITECTURE CONTROLLER IN THE U.S.A., Kazuo Yamazaki, Proceedings of the 7th International Machine Tool Engineers Conference (IMEC), pp. 204-218, 1996. (Invited)
  4. SIMULTANEOUS SYNTHESIS AND DEFSIFICATION OF MoSi2 BY FIELDACTIVATED COMBUSTION, I.J. Shon, Z.A. Munir, K. Yamazaki, and K. Shoda, Journal of the American Ceramic Society, Vol. 79, No. 7, pp. 1875-1880, 1996.
  5. DYNAMICALLY AUGMENTING DATABASE-BASED TOOL DATA MANAGEMENT FOR TRUE-CNC, Benjamin Lam, Jiancheng Liu, Kazuo Yamazaki, Proceedings from International CIRP Design Seminar, Multimedia Technologies for Collaborative Design and Manufacturing, pp.110-116, 1996.
  6. ERROR ANALYSIS BY SIMULATION FOR A FIBER BASED NON-CONTACT MEASUREMENT PROBE SYSTEM, Yue Yang and Kazuo Yamazaki, Proceedings of American Society of Precision Engineering 1996 Annual Meeting, Vol. 14, pp. 126-131, 1996.
  7. STUDY ON CALCULATION ERROR OF THE MATERIAL REMOVAL VOLUME IN Z-MAP BASED MACHINING SIMULATION, Yoshimasa Hayashida, Kazuo Yamazaki and Takeshi Kishinami, Journal of Japan Society for Precision Engineering, Vol. 62, No. 11, pp. 1622-1626, 1996.
  8. OPTICAL SENSOR FOR DETECTING A POSITION AND AN INCLINATION, H. Aoyama, K. Yamazaki, and M. Sawabe, Transaction of the ASME, Vol. 118, pp.400-405, 1996.
  9. CONSOLIDATION OF NANOCRYSTALLINE IRON POWDERS, Sang Yoo, Jim Rawers, Joanna R. Groza, Kazuo Yamazaki, and Kazuo Shoda, Processing and Properties of Nanocrystalline Materials, the Minerals, Metals and Materials Society, pp. 303-307, 1996.
  10. PRECISION MANUFACTURING ENGIINEERING IN THE U.S.A., (JAPANESE PAPER, ENGLISH ABSTRACT ATTACHED), K. Yamazaki, Journal of the Japan Society for Precision Engineering, Vol. 61, No. 1, pp. 59-64, 1996.(invited)
  11. EFFECT OF Ti02 DOPING ON RAPID DENSIFICATION OF ALUMINA BY PLASMA ACTIVATED SINTERING, R.S. Mishra, A.K. Mukherjee, K. Yamazaki, and K. Shoda, Journal of Materials Research, Vol. 34, No. 9, pp. 1383-1386, 1996.
  12. PAS (PLASMA ACTIVATED SINTERING) TRANSIENT SINTERING PROCESS CONTROL FOR RAPID CONSOLIDATION OF POWDERS, K. Yamazaki, S.H. Risbud, H. Aoyama, and K. Shoda, Journal of Materials Processing Technology, Vol. 56, pp. 955-965, 1996.

1995

  1. A STUDY ON COMPARISON OF PERFORMANCE CHARACTERISTICS BETWEEN PRE-PLUNGER TYPE AND IN-LINE TYPE PLASTIC INJECTION MOLDING MACHINES, (JAPANESE PAPER, ENGLISH ABSTRACT ATTACHED), N. Nishiwaki, S. Hori, K. Yamazaki, T. Ohmori, M. Fujikawa, Proceedings of 7th Annual Conference of Plastic Injection, Japan Society of Polymer Processing, pp. 221-222, 1995.
  2. DEVELOPMENT OF A SOCCER-PLAYING ROBOT FOR ROBOCON ’94: AN EXAMPLE OF HANDS-ON EDUCATION IN MECHATRONICS ENGINEERING, Kazuo Yamazaki, JoeBen Bevirt, Jeff Collins, Mick Estes, Noah Han, Jimmy Ip, Nam Suk Kim, Cindy Ko, Karl Nelson, Jason Petersen, and Yoichi Yokoyama, International Journal of Engineering Education, Tempus Publications, Vol. 12, No. 2, pp. 100-114, 1995.
  3. DIFFUSION BONDING OF BORON NITRADE ON METAL SUBSTRATES BY PLASMA ACTIVATED SINTERING (PAS) PROCESS, Sang Yoo, Joanna R. Groza, T.S. Sudarshan, and K. Yamazaki, Scripta Mettalurgica, Vol 34, No. 9, pp. 1383-1386, 1995.
  4. MECHANICAL ALLOYING PROCESSING AND RAPID PLASMA ACTIVATED SINTERING CONSOLIDATION OF NANOCRYSTALLINE IRONALUMINIDES, M.A. Venkataswamy, J.A. Schneider, J.R. Groza, A.K. Mukherjee, K. Yamazaki, and K. Shoda, Elsevier Science Materials Science and Engineering, pp. 153-158, 1995.
  5. PLASMA ACTIVATED SINTERING (PAS) OF b-Fe (Nm) Si (A1) 2 PREPARED BY MECHANICAL ALLOYING (MA), S. Shiga, K. Masuyama, M. Umemoto and K. Yamazaki, Proceedings of Sintering, 1995.
  6. MATHEMATICAL MODEL OF FEED DRIVE MECHANICAL SYSTEM AND FRICTION FOR CNC MACHINE TOOLS, M. Tsutsumi, S. Ootomo, Y. Okazaki, K. Yamazaki, and Dong-Fang Ge, Journal for the Japan Society for Precision Engineering, 61(10):1458-1462, 1995.
  7. MECHANISM OF PLASMA ASSISTED SINTERING IN Si3N4 CERAMIC SYSTEM, J.A. Schneider, A.K. Mukherjee, K. Yamazaki, K. Shoda, Materials Letters, 25:101- 104, 1995.
  8. TRUE-CNC: THE MECHATRONICS CONTROLLER FOR THE NEXT GENERATION INTELLIGENT MACHINE TOOLS, Kazuo Yamazaki, Proceedings of the 2nd International Conference on Mechatronics and Machine Vision for Practice, pp. 49-58, 1995.
  9. AUTONOMOUS PROCESS PLANNING WITH REAL-TIME MACHINING FOR PRODUCTIVE SCULPTURED SURFACE MANUFACTURING BASED ON AUTOMATIC RECOGNITION OF GEOMETRIC FEATURES, Kazuo Yamazaki, Yasuhiro Kawahara, Jieh-Chian Jeng, Hideki Aoyama, Annals of the CIRP, 44(1): 439-444, 1995.
  10. THE NEXT GENERATION CNC TECHNOLOGIES, (JAPANESE PAPER, ENGLISH ABSTRACT ATTACHED), K. Yamazaki, Proceedings of the 25th Machine Tool Engineer Congress, pp. B2-2-1 to B2-2-6, 1995.
  11. MANUFACTURE-FRIENDLY RAPID CONSOLIDATION PROCESS BASED ON PLASMA ACTIVATION OF POWDERS, Subhash H. Risbud, Kazuo Yamazaki, and Kazuo Shoda, International Journal of Advanced Manufacturing Technology, 10:93-98, 1995.
  12. NEW RAPID POWDER CONSOLIDATION PROCESS BY PLASMA ACTIVATED SINTERING (PAS), Sang Yoo, Joanna R. Groza, Subhash Risbud, Kazuo Yamazaki, Proceedings of the 1995 NSF Design and Manufacturing Grantees Conference, University of California, San Diego, LaJolla CA, January 4-6, pp. 505-506, 1995.

1994

  1. PLASMA ACTIVATED SINTERING (PAS) OF TUNGSTEN POWDERS, Gwen Jones and Joanna R. Groza, Kazuo Yamazaki, Kazuo Shoda, Material and Manufacturing Processes, 9(6):1105-1114, 1994.
  2. RAPID CONSOLIDATION OF Bi-Pb-Sr-Ca-Cu-O POWDERS BY A PLASMA ACTIVATED SINTERING PROCESS, Chien-Hua Shan and Subhash Risbud, Kazuo Yamazaki, Kazuo Shoda, Materials Science and Engineering, B26, pp. 55-60, 1994.
  3. PLASMA ACTIVATED POWDER SINTERING FOR RAPID NET SHAPE MANUFACTURING－PRINCIPLE, CONTROL AND RESULTS, Munehiko Yokogawa, Kazuo Yamazaki, Subhash H. Risbud, Joanna Groza, Hideki Aoyama, and Kazuo Shoda, In: Advancement of Intelligent Production, Eiji Usui (Ed.), Japan Society for Precision Engineering, Elsevier Science B.V., pp. 582-587, 1994.
  4. PAS: PLASMA ACTIVATED SINTERING – TRANSIENT SINTERING PROCESS CONTROL FOR RAPID CONSOLIDATION OF POWDERS, Kazuo Yamazaki, Subhash H. Risbud, Hideki Aoyama, and Kazuo Shoda, Advances in Materials and Processing Technologies, (AMPT’93), M. S. J. Hashmi (Ed.), TechMan Ireland Ltd., Dublin, Ireland, pp.1357-1367, 1994.
  5. A NEW METHOD FOR CONSTRUCTING A SOFTWARE MODEL OF SCULPTURED SURFACES WITH C2 CONTINUITY FROM A PHYSICAL MODEL, Hideki Aoyama, Ichiro Inasaki, Takeshi Kishinami, and Kazuo Yamazaki, In: Advancement of Intelligent Production, Eiji Usui (Ed.), Japan Society for Precision Engineering, Elsevier Science B.V., pp. 7-12, 1994.
  6. S-CUBE: SUPER SERVO SYSTEM FOR INTELLIGENT MOTION CONTROL FOR MECHATRONICS SYSTEMS, Daehie Hong, Kazuo Yamazaki, Steve A. Velinsky, In: Intelligent Automation and Soft Computing, Mohammad Jamshidi, Charles Nguyen, Ronald Lumia, Junku Yuh (Eds.), Vol. 1, TSI Press, pp. 505-510, 1994.
  7. DETERMINISTIC INJECTION MOLDING FOR QUALITY PLASTIC PARTS MANUFACTURING, Kazuo Yamazaki, Kazuo Shoda, Misao Fujikawa, Annals of the CIRP, 43(1):275-278, 1994.
  8. A STUDY ON AUTONOMIC HIGH SPEED MEASUREMENT OF A THREE DIMENSIONAL SHAPE BY USING A NON-CONTACT SENSOR FOR DETECTING AN INCLINATION ANGLE AND A GAP DISTANCE (2nd REPORT)－DEVELOPMENT AND EVALUATION OF THE SENSOR ELEMENT, Hideki Aoyama, Kazuo Yamazaki, Kee Sein Lee, and Kunitoshi Nishimura, Journal for the Japan Society for Precision Engineering, 60(7):954-958, 1994.
  9. A STUDY ON AUTONOMIC HIGH SPEED MEASUREMENT OF A THREE DIMENSIONAL SHAPE BY USING A NON-CONTACT SENSOR FOR DETECTING AN INCLINATION ANGLE AND A GAP DISTANCE (1st REPORT)－DESIGN OF AN ELEMENT FOR THE SENSOR WITH MULTI-BEAM PROJECTION, Hideki Aoyama, Kazuo Yamazaki, Kee Sein Lee, and Masaji Sawabe, Journal for the Japan Society for Precision Engineering, 60(6):847-852, 1994.
  10. MEASURING METHODS OF SHAPE ELEMENTS BY DETECTING POSITION VECTORS AND UNIT NORMAL VECTORS, Hideki Aoyama, Ichiro Inasaki, Takeshi Kishinami, Kazuo Yamazaki, Proceedings of 1994 Japan-U.S.A. Symposium on Flexible Automation, pp. 563-568, 1994.
  11. FLEXIBLE SERVO CONTROL OF A FULLY ELECTRIC-DRIVEN WHEELED MOBILE ROBOT FOR HIGHWAY MAINTENANCE AUTOMATION, Daehie Hong, Kazuo Yamazaki, and Steven A. Velinsky, 20th International Conference on Industrial Electronics, Control and Instrumentation, Vol. 3/3, pp. 1495-1500, 1994.
  12. A NEW ROBOTIC SYSTEM CONCEPT FOR AUTOMATING HIGHWAY MAINTENANCE OPERATIONS, S. E. Winters, D. Hong, S. A. Velinsky, and K. Yamazaki, In: Robotics for Challenging Environments, Laura A. Demsetz and Paul R. Klarer (Eds.), ASCE, pp. 374-382, 1994.
  13. FUNDAMENTALS AND APPLICATIONS OF THE PLASMA ACTIVATED SINTERING (PAS) PROCESS, Mark Tracy, Subhash H. Risbud, Joanna R. Groza, Kazuo Yamazaki, Proceedings of the 1994 NSF Design and Manufacturing Grantees Conference, MIT, Cambridge, MA, January 5-7, pp.651-652, 1994.